PISTON RODS TUBES
Brochure
Standards |
- EN 10305-1 - EN 10305-4 |
Used for |
- Manufacturing of Piston rods for hydraulic cylinders. - The tubes are suitabe for chroming. Note: The tubes are cold drawn having OD machined by center-less grinding to final piston rod size plus an agreed small over metal suitable for last grinding operation before chroming. |
|
|
Final surface finish, Ra: |
0.40 µm or better. |
Straightness |
max 0.35 mm/1000mm. |
Chemical composition (%) | |
Mechanical properties | |
Impact test | |
Non-destructive testing | |
Tube ends preparation |
Protected with plastic caps. |
Surface protection | Unprotected for last grinding operation before chroming.
|
Marking | Continuous marking along the length of the tube with following information: manufacturer’s logo, dimension (OD x ID), steel grade, heat number and the number of standard or other data as per the customers’ request. |
Packaging | Packed in bundles with circular or hexagonal cross-section, bundle weight of maximum 2000 kilograms. The bundles are tied with protected metallic straps to provide protection against mechanical damage and corrosion during storage and in transit. |
Mill test report | Mill test reports are issued to customer requirements. Usually it comply with EN 10204 – 3.1 |